Menu
Your Cart

EASY JTAG WITH EMATE 13 IN 1 MOORC

EASY JTAG WITH EMATE 13 IN 1 MOORC
Rs.24,500.00
Ex Tax: Rs.24,500.00
  • Stock: In Stock
  • Model: EASY JTAG WITH EMATE 13 IN 1 MOORC

OVERVIEW

Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

Z3X Easy-Jtag Plus - Outstanding features:

  • One click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

Z3X Easy-Jtag Plus - Hardware features:

  • Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
  • Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
  • Updated power management subsystem – full digital PWM with ADC control
  • Added Micro-USB connector (if additional power required)
  • Added VCC and VCCQ switch with overcurrent protection
  • Updated USB device interface: USB 2.0 480 Mbps (high speed)
  • Integrated ISP engine: Z3X high power pro engine (4 MB/s)
  • ISP support 1 and 4 bit* connection
  • Added eMMC 8-bit high-speed interface up to 42 MHz
  • Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
  • Integrated M-PHY* interface
  • Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
  • Integrated self-test core that excludes 90% faults in production
  • Integrated CCID card reader for Z3X Software Use

Z3X Easy-Jtag Plus - Hardware benefits:

  • Box to Host PC speed increased up to 40 MB/sec
  • JTAG Interface speed increased by 20%
  • eMMC 1 Bit ISP Speed increased up to 4 MB/sec
  • eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
  • eMMC 4 Bit Speed up to 18 MB/sec
  • eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
  • Compatible with 99% host PC systems and OS
  • Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
  • Compatibility with most of the popular eMMC sockets (with supplied adapters)
  • Plug and Play for Windows OS 8/ 8.1/10
  • Full support for Windows XP



E-Mate X MOORC EMate 13 In 1 EMMC Tool BGA Socket For Easy JTAG Plus / UFI / RIFF / Medusa Pro Box Support For BGA 529 169 100 136 254 221 168 153 186 162

  • E-Mate X MOORC eMate 13 in 1 EMMC Tool BGA Socket for Easy JTAG Plus / UFI / RIFF / Medusa Pro Box Support for BGA 529 168 100 136 254 221 168 153 186 162
  • Can disassemble, clear, change pin at any time, can use for long time, can work all box to read/write full flash
  • Timesaving but easy to operate, Stable and efficient
  • Intelligent: just read it, operate the programming, reading the chip ROM1 USERDATA with just a key. 
  • Speed: eMMC which read-write speed could be 33MB per second. Its speed is related to eMMC version. 
  • Simple: it is no need to choose the font type. The interface is simple and easy to use. which support all the chip package of emmc
  • Reliable: special machine design of the third generation eMMC, special power supply, independent overcurrent protection

Write a review

Note: HTML is not translated!
Bad Good